12
Brocade Silkworm 3200, 3250, 3800, 3850, 3900, 12000, and 24000 Switches Rackmounting Guide • October 2004
e. Tighten the screws to a torque of 25 inch-pounds (28.8 cm-kgs).
f. Repeat Steps d and e with the bracket on the back end of the same outer slide
rail.
The bracket position can be adjusted to fit the rack. The back end uses three
screws.
g. Repeat Steps a through f with the second outer slide rail.
FIGURE 2-2
Brocade Silkworm 3800 Switch and Outer Slide Rail Installation
IOIO
I
IP
Three-hole extension slide mount L-brackets
Front of r
ac
k
Inner slide rail
Outer slide rail
Phillips 10-32 x 3/8-in. screw
Rackmount bracket
Power cord clip
Three-hole
slide mount
L-bracket
extension