Sun Microsystems DGA 5000, Operator'S Manual, Page: 29 / 84

•
Press
“Back” or the “Gas Analyser” toolbar icon button to return to the
Gas Analyser Menu .
5.3 Gas Analyser Maintenance Menu Options
Figure 5-5 The Gas Analyser Maintenance Menu
The Maintenance procedures that can be initiated from the Gas
Analyser Maintenance Menu are:
- Leak Check (Vacuum) (see 10.2 ). (item 1)
- Leak Check (Gas) (see 10.3 ). (item 2)
- Gas Calibration Check (see 10.4 ). (item 3)
- Check and/or Install the O2 Cell (see 10.5 ). (item 4)
- Diagnostics/Gas Calibration (item 5 &6) are restricted to Service
Engineers only.
•
To initiate a Leak Check (Vacuum) ,
select the “Leak Check (Vacuum)
option.
•
To initiate Leak Check (Gas) , select the Leak Check (Gas) option.
•
To initiate a Gas Calibration Check , select the Gas Calibration Check
Option.
20
G
AS
A
NALYSER
M
AINTENANCE
M
ENU