Sun Microsystems 5500, Reference Manual

Page: 234 / 304

E-16 Sun Enterprise 6500/5500/4500 Systems Reference Manual • April 1998
6. Replace the two screws that attach the media tray to the cabinet pillar (
FIGURE E-8
).
7. Replace the two screws that attach the media tray to the flange on the bottom of
the fan tray shelf (
FIGURE E-7
).
8. Connect the media tray power and data cable assemblies into the back of the
media tray.
9. Replace the fan tray shelf cover.
Replace the 10 screws and attach the cover to the cabinet.
10. Replace the side panel closest to the key switch assembly.
See Chapter 12 “Preparing for Service,” for information on replacing the side panel.
11. Power on the Enterprise system.
See the power on instructions in Chapter 11 “Powering Off and On.”
E.2.6 SCSI Tape Adapter PCS Assembly
E.2.6.1 Removing the SCSI Adapter Assembly
1. Completely power off the Enterprise system.
See the power off instructions in Chapter 11 “Powering Off and On.”
2. Disconnect the two cable assemblies from the front of the SCSI adapter assembly
(
FIGURE E-6
).
3. Loosen the three captive screws on the bottom that secure the SCSI adapter
assembly to the cabinet (
FIGURE E-12
).