39
5.0
Drill Settings – Coulter overview
5.1 Disc Depth
Leading disc depth is adjusted by removing M12 bolts and rotating unit to the new desired position.
5.2 Leg Depth
Hydraulic leg and contour
following pressure
Covering discs
Seed depth
Leg depth
Leading disc
depth
Shallow
working
Deep
working
M12 bolt
25mm leg depth pin fitted below
the leg arm as a depth stop
Deepest
leg depth
Shallowest
leg depth
Caution!
Check leg is always deeper
than the coulter
Hydraulically retract
all legs before
adjusting pin
Loosening leg
guide
setting-
Cereals 100-150mm (4-6”)
OSR/Beans 150-225mm (6-9”)
