PL
US
MODEL
ONL
Y
Chair Height Adjustment.
The overall height of the chair is adjusted by lifting the
front of three levers located below the seat on the right hand side. Lift your weight
off the chair allowing it to rise and release the lever at the desired height. To lower
simply lift the lever.
Back Recline Adjustment.
The back angle is independently adjusted by lifting the
rear of the three levers located below the seat on the right-hand side. It can be
locked at the required angle by pushing the lever down or left unlocked to follow the
user’s movements.
Seat & Back Angle Adjustment.
The combined seat and back angle can be adjusted
by lifting the middle of the three levers located below the seat on the right-hand
side. The chair can be locked at the required angle by pushing the lever down or it
can be left unlocked to follow your movements. The tension of the recline can be
adjusted by turning the knob located under the front of the seat.
Back Height Adjustment.
The back height is adjusted by lifting the back up a step at
a time for correct positioning of the lumbar support. When the back reaches the top
of its travel it will then drop back to the start position.
Inflatable Lumbar Support.
The inflatable lumbar support is adjusted using the hand
bulb hanging under the left-hand side of the seat. Squeeze the bulb to inflate and
press the button on the bulb to deflate.
Arm Height Adjustment.
The height adjustable arms have a lever located under
the outside edge of the arm pad. Press this in, set the arm at the desired height and
release the lever to lock.
Headrest Adjustment.
The headrest can easily be adjusted for height, angle and reach
to provide tailored support to the neck and head. Just lift and rotate.
Inflexion & Inflexion Plus
Operating instructions,
care guide and warranty
User instructions
A L L A D J U S T M E N T S S H O U L D B E M A D E W H I L S T S E AT E D
Inflexion instructions summit at home.indd 1
Inflexion instructions summit at home.indd 1
16/12/2020 13:25
16/12/2020 13:25