Summit Inflexion IF81, Operating Instructions, Page: 1 / 2

Chair Height Adjustment.
The overall height of the chair is adjusted by lifting the
front of three levers located below the seat on the right hand side. Lift your weight
off the chair allowing it to rise and release the lever at the desired height. To lower
simply lift the lever.
Back Recline Adjustment.
The back angle is independently adjusted by lifting the
rear of the three levers located below the seat on the right-hand side. It can be
locked at the required angle by pushing the lever down or left unlocked to follow
the user’s movements.
Seat & Back Angle Adjustment. . The combined seat and back angle can be
adjusted by lifting the middle of the three levers located below the seat on the
right-hand side. The chair can be locked at the required angle by pushing the
lever down or it can be left unlocked to follow your movements. The tension of the
recline can be adjusted by turning the knob located under the front of the seat.
Back Height Adjustment. The back height is adjusted by lifting the back up a step
at a time for correct positioning of the lumbar support. When the back reaches the
top of its travel it will then drop back to the start position.
Inflatable Lumbar Support. The inflatable lumbar support is adjusted using the
hand bulb hanging under the left-hand side of the seat. Squeeze the bulb to inflate
and press the button on the bulb to deflate.
Seat Depth Adjustment. If the chair is fitted with an optional seat slider the seat
depth is adjusted by lifting the lever located below the middle of the seat on the
left-hand side. Slide the seat forwards and release the lever to lock in desired
position.
Need any help? / 01225 777 844 / sales@summitchairs.co.uk / summitchairs.co.uk /
Operating instructions
Inflexion IF81 & IF91 Executive Task Chairs
A L L A D J U S T M E N T S S H O U L D B E M A D E W H I L S T S E AT E D