Summit 42369, Installation Manual

Page: 1 / 20

42369 US 11/22/05
LP
LOCATING YOUR GRILL
When determining a suitable location for your Summit
®
gas grill installation, give attention to concerns such as exposure to wind, proximity to traffi c paths, and
keeping any gas supply lines as short as possible. Never locate the Summit
®
gas grill in a garage, breezeway, shed, under an unprotected overhang, or other
enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fi re.
CLEARANCE FROM SURFACES OR STRUCTURES
WARNING: Clearance from any surface or structure is
24 inches (609.6 mm) from the back and sides of the grill.
Refer to “Typical Gas Supply Installation” before starting
installation.
WARNING: The structure, “island”, countertops, and
adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible,
contact your local building materials supplier or fi re department.
A
ny
S
ur
face
Any Surface
24 inches (61 cm) Any Surface
24 inches (61 cm)
24 inches (61 cm)
Grill Frame
Note: For a countertop treatment: Recommended 3/4 inch
(19.1 cm) overhang. Notch front edge for frame to fully
slide in.
27 inches (685.8 mm) min. for
lid clearance
1
3
2
SUMMIT
®
BUILT-IN LP GAS GRILL INSTALLATION GUIDE
PLATINUM D4 , D6
BUILT-IN STRUCTURE CUTOUT DIMENSIONS
ALL DIMENSIONS ARE TO FINISHED SURFACES.
WARNING: All countertop fi nished surfaces must be
constructed of a noncombustible material.
Built-In Cutout Dimensions
D4 D6 Tolerances
1 30
1/4
˝ 38
1/4
˝ +
1/4
” -
1/4
˝
2 34
1/4
˝ 34
1/4
˝ +
1/4
” -
1/4
˝
3 21˝ 21˝ +
1/4
” -
1/4
˝
THIS GAS APPLIANCE IS DESIGNED
FOR OUTDOOR USE ONLY.
42369