21072 HARDWARE KIT ULTIMATE VIPER
PN
Description
QTY
10612
1/4” Lock Nut (1/4 -20)
2
10633
Neoprene Washer
2
10632
2 1/2” Carriage Bolt (1/4 -20)
2
10601
1 3/4” Bolt (1/4 -20)
2
10544
Gun Rest Adjustment Bracket
4
10660
Knob
2
20431
Gun Rest Mounting Bracket
2
Ultimate Viper Accessory Instructions
Part 1. Gun Rest
Step 1.
Position the gun rest mounting bracket as shown in
Figure
1
. The bracket MUST be placed at least 3” up the arm to provide
clearance for the platform when the stand is packed together. The
long side of the bracket should go on the outside of the stand.
Warnings and Precautions
NEVER SIT ON THIS GUN REST OR ATTEMPT TO USE IT AS A
CLIMBING AID!
•
ULTIMATE VIPER ACCESSORIES AND PARTS LIST
PN
Description
QTY
40104
Gun Rest Tube
1
10950
Comfort Mat
1
11911
Drop Blind
1
21072
Hardware Kit
1
Figure 1
Step 2.
Slide one 2 1/2” carriage bolt through the mounting bracket
from the inside out.
Step 3.
Align one Gun Rest Adjustment Bracket as shown in
Figure 2
. Slide the bracket over the carriage bolt and seat it on the
mounting bracket.
Step 4.
Position the Neoprene washer as shown in
Figure 2
. Slide
the washer over the carriage bolt.
Step 5.
Position another Gun Rest Adjustment Bracket as shown
below. The teeth should face inward. Slide the bracket over the
carriage bolt and seat it against the bracket/washer from
Step 3
.
Step 6.
Slide the Gun Rest tube onto the outside bracket. Push the
carriage bolt through the pre-punched hole. Use the large knob to
secure.
Step 7.
Repeat process for the other side. The carriage bolt may
have to be backed out slightly as you position the two Gun Rest
Brackets and the washer between the Gun Rest tube and the Seat
Base.
Step 8.
Attach the 18” arm pad to the front of the bar using the
supplied cable ties.
Figure 2
Gun Rest Adjustment Brackets
Neoprene Washer
Carriage Bolt
Gun Rest Tube
Knob
If you have any questions or concerns about this or any Summit
product, please to not hesitate to call or email us:
www.summitstands.com
256-353-0634
Ultimate Viper Accessory - 2007 Instructions -
PN 11807
