Summit Professional FFBF181ESBI, Detailed Instructions For Use, Page: 9 / 32

9
6
8
8
mm
6
4
0
mm
1
2
0
1
mm
1
2
4
9
mm
545433
•
This appliance is intended for built-in installation, but it may also be installed
freestanding. When installed built-in, please allow these minimum clearances to ensure
the best operation and proper ventilation:
1/4” on one side (and even more space on
the hinge side to allow the doors to open wider than their width to make it easier to
remove shelves and storage bins)
, 5/8” at the rear and 1/16” at the top. Be sure that
airflow at the bottom of the appliance is not blocked. Consider the clearance
required to open the door fully in order to allow pulling out the drawers and
shelves (see installation diagram).
600 mm
644 mm
NOTE: The doors of this appliance are not user-reversible.
CONNECTING THE APPLIANCE
•
Connect the appliance to the power socket using a connection cable. The
wall outlet should be
fitted with a ground contact (safety socket). Nominal
voltage and frequency are indicated on the rating plate/label with basic
information on the appliance.
•
The appliance must be connected to the power line and grounded in
compliance with the effective standards and regulations. The appliance will
withstand short-term deviations from the nominal voltage, but not more
than +/- 6%.
8