Summit Professional FFBF181ESBI, Detailed Instructions For Use, Page: 8 / 32

10
545433
INSTALLATION AND
CONNECTION
SELECTING THE ROOM
•
Do not install the refrigerator where temperatures will be below 55°F or
above 110°F, because it will not maintain proper temperatures and the
refrigerator could develop high internal humidity.
Warning: Make sure the room where the appliance is installed is large enough.
There should be at least 1 yd3 of space per 0.37 ounces of refrigerant. Amount
of refrigerant is stated on the rating plate in the appliance interior.
INSTALLING THE APPLIANCE
max
30 mm
Appliance installation should be
carried out by at least two persons to
avoid any physical injury or damage to
the appliance.
•
The appliance must stand level or
tilted slightly backwards, stable on a
solid base. At the front, the
appliance is
fitted with two adjustable
legs that can be used to level the
appliance. At the rear side, casters
allow for easier installation of the
appliance (only with some models).
•
There should be a clearance of at
least 5 cm (2
”) between the
appliance and any cupboard
installed above it, in order to allow
adequate cooling of the condenser
unit.
•
Do not expose the appliance to
direct sunlight and do not place it
near any source of heat. If this
cannot be avoided, install an
insulation panel.
7