background image

BANISTER & STAIR METAL GATE 

WITH DUAL INSTALLATION KIT

INSTRUCTION MANUAL

27903Z

Please read the following instructions 

and warnings carefully.

Keep this instruction manual 

and save for future reference.

For technical support contact us at 

1-401-671-6551

 or

 

www.summerinfant.com/contact.

Tools required: Phillips head screwdriver 

and drill (neither included).

For use with children from 6 to 24 months.

Adult assembly required.

Keep small parts away from children.

6/19

Colors and styles may vary.

MADE IN CHINA.

Summer Infant (USA), Inc.

1275 Park East Drive

Woonsocket, RI 02895 USA

1-401-671-6551

© 2019 Summer Infant (USA), Inc.

   WARNING

• 

ALWAYS 

install and use gate as directed, using all required parts. 

• Install according to manufacturer’s instructions.

• 

STOP 

using when a child can climb over or dislodge the gate.

• Use only with the locking/latching mechanism securely engaged.

• 

NEVER 

use a gate to keep child away from pool.

• 

NEVER 

leave child unattended.

• 

ALWAYS 

close and lock the gate behind you. 

• This product will not necessarily prevent all accidents. Proper adult supervision is 

required at all times.

• Do not use if any components are missing or damaged.

• Adult assembly required.

• Exercise care when unpacking and assembling product.

• Intended for use with children from 6 months through 24 months. 

• Do not mount to spindles less than 2 in. in diameter. 

• Check daily that banister brackets are securely attached and gate is securely 

anchored to banisters and/or wall.

Children have died or been seriously injured when gates are not securely installed. 

Summary of Contents for 27903AZ

















Reviews: