Fusion Splicer
Type-Q101-M12
(T-71M12)
Fiber Cleaver
FC-6RM etc.
Jacket
Remover
JR-6
Fiber Holder
FHM-12
(For 12c Fiber)
Fiber Holder
FHM-8
(For 8c Fiber)
The Lynx-CustomFit® Splice-On Connector is designed and
manufactured to assure personal safety. Improper operation
can result in bodily injury and serious damage to this product.
Please read and observe all warnings instructions given in this
operation manual.
Wear safety glasses to protect your eyes when
handling optical fiber.
Never look into the end of a microscope or optical
cable connected to an optical output device that is
operating. Laser radiation is invisible, and direct
exposure can severely injure the human eye.
Alcohol is flammable, causes irritation and is harmful
if swallowed or inhaled. Keep alcohol away from
heat, sparks, skin, and avoid contact with eyes.
In the case of the work at the high place, please be
careful not to drop an assembling tool.
Lynx
Lynx--CustomFit
CustomFit®
® Splice
Splice--On
On Connector
Connector Ver. 2
Ver. 2
-- LYNX2
LYNX2--MPO
MPO for
for Round
Round Cord
Cord with
with 12 or 8
12 or 8 Individual
Individual Fibers
Fibers --
Installation
Installation Manual
Manual
!
!
!
1. Improper assembly will result in a loss of performance.
Please read instructions given in this operation manual
and the operation manual of the fusion splicer.
2. Never touch the fiber of the stub. It has been inspected
in the factory.
3. The product is sensitive to dirt or dust. Do not take out
any parts from the package until it is to be used.
4. The characteristic will be influenced by the fiber
cleaved surface condition. Please use a cleaver which
has a good cleaving characteristic.
5. Do not remove the dust cap until the connector has
been completely assembled in order not to cause an
high insertion loss due to them.
For your safety operation
!
Precautions
Composition
Disposable
Assembling Tools
ETK1123092D
Below equipments and tools are required.
Furcation
Rear Parts
(T-71M12)
JR-6
(For 12c Fiber) (For 8c Fiber)
Fiber Alignment Tool
FA-03
Cord Tool
LYNX2-CORDTOOL-
2&3
Kevlar Cutter
North Carolina (USA)
Sumitomo Electric Lightwave Corp.
78 Alexander Drive, P.O. Box 13445, RTP, NC 27709
TEL +1-919-541-8100
http://www.sumitomoelectric.com/
Yokohama (Japan)
Sumitomo Electric Industries, Ltd.
(Lightwave Network Products Division)
1, Taya-cho, Sakae-ku, Yokohama 244-8588, Japan
TEL +81-45- 853-7223, http://global-sei.com/fttx/
London (UK)
Sumitomo Electric Europe Ltd.
220 Centennial Avenue, Elstree, Herts. WD6 3SL, UK
TEL +44 (0)20-8953-8118
http://www.sumielectric.com/
SMF : G.652, G.657
MMF : MM50(OM2), MM50(OM3), MM50(OM4), MM62.5(OM1)
Disposable
Holder (*1)
Dust Cap
Front
Housing
w/Spring
Rear
Stopper
MT STUB
Boot
Protection
Sleeve
(*1) 1 pc / 100 connectors
Recommended Program
Please perform Arc test prior to the splicing operation.
(See the operation manual of the splicer.)
*Ribbon fiber for testing is included in the connector kit.
Please check fiber type inside the field fiber.
Dummy Cap
w/ Tether
SM Low Loss
SM Std. Loss
MM62.5 OM1
MM50 OM2 MM5010GOM3
8 degree Polish
Flat Polish
Yellow
Green
Beige
Black
Aqua
Polish Surface and Housing Color
Furcation
Tube
Copyright © 2011 Sumitomo Electric Industries, LTD.
Rear Parts
Spiral
Tube
Splicer
Fiber
Splicing Program
Heater Program
Type-Q101-M12
(T-71M12)
SMF 12c
SM12c
Lynx MPO
SMF 8c
SM8c
MMF 12c
MM12c
MMF 8c
MM8c
