Sulzer 16E, Product Manual

Page: 65 / 72

16E / 16E-H / 16E-P Spray Gun
65
MAN 96150 EN 01
6.10.4Gas Head Assembly
The gas head assembly may be assembled on or off the spray gun. To
install the gas head assembly, install o-ring (134) on central housing
(129) and secure gas head assembly to central housing with one
screw (86) and two screws (91).
1. Install (dry; no Krytox®) four o-rings (83) and one o-ring (22) on
valve core (82).
2. Apply Krytox®, to o-rings and entire surface of valve core (82).
3. Carefully install valve core (82) through right side of gas head sub-
assembly (85).
1. Install compression spring (87), detent pin (88) and valve handle
(89) on valve core (82) and secure with screw (90).
2. Install pawl and shaft assembly (84) through gas head subassem-
bly (85) and safety handle (92). Secure safety handle to pawl and
shaft assembly with screw (93).
16e_gas_head
74
94
83
83
75
76
77
78
79
80
81
82
83
85
84
86
87
88
89
90
91
92
93
95
96
97
98
99
100
101
102 103
100
22
134
129
INFO
See “Gas Head Valve”
on page 42 for impor-
tant information on ser-
vicing the gas head
assembly.
i