Thank you for purchasing Sullivans Add-A-Table, please note that there is NO ASSEMBLY required, your Add-A-Table is ready to use out of the box,
the following guidelines are simply to help you set up your table for regular use and also show how to connect more Add-A-Tables (sold separately).
1. Remove
Add-A-Table
from
packaging and rest it
on a flat wall with both
hinges facing up as shown.
3. Fold out the left and right legs
and place them into their respective
leg retainers as shown.
2. Remove
Strap Tie
and lift
up the left and right table
legs as shown.
Strap Tie
Adjustable ADD-A-TABLE
Item No. 39271
5. When used as a drawing board, tighten
rail supports and use pencil rail.
6. Use the included joining plate and screws to
join 2 or more ADD-A-TABLES together.
4. Adjust the Table’s Height and Angle as desired
.
Please note:
When raising the table, raise the back legs first, then the front.
When lowering the table, lower the front legs first, then the back.
Lower
this side
first
Raise
this side
first
