Sullair TSR20, User Manual

Page: 40 / 48

TSR32 USER MANUAL R00 SECTION 6
40
5. Install the element into the filter canister.
6. Thread the canister and element back on the
filter head.
7. Restart compressor and check for leaks.
6.6 AIR FILTER MAINTENANCE
Refer to Figure 6-2 . Air filter maintenance on air filter
no. 250006-718 should be performed when the
lays Air Filter Maint, or
once a year, whichever comes first. If the filter needs
to be replaced, order replacement element no.
02250135-149. Consult the following procedures to
replace the air filter element.
A
IR
F
ILTER
E
LEMENT
R
EMOVAL
1. Clean exterior of air filter housing.
2. Release the three retaining clamps and
remove the end cap.
3. Remove element and clean interior of
housing using a damp cloth.
E
LEMENT
R
EPLACEMENT
Element replacement is performed by reversing the
removal instructions. Make sure that the element is
fully seated into the housing.
6.7 SEPARATOR MAINTENANCE
Replace the separator elements when shown by the
year, whichever comes first. The separator elements
must be replaced.
DO NOT attempt to clean and
reinstall the separator elements.
S
EPARATOR
E
LEMENT
R
EPLACEMENT
Refer to Figure 6-3 . The separator elements must be
changed when indicated by the Supervisor
, whichever occurs first.
Use the following procedure below to change the
separator elements.
Figure 6-2: Air Filter Assembly
1. Housing 3. Dust Collector
2. Element (I) 4. Sealing Washer
(I) Element Replacement Kit P/N 02250135-149
Figure 6-3: Separator Element Assembly
1. Cover 3. Element-Primary (I)
2. Element-Secondary (II) 4. Receiver Tank
(I) Primary Element Replacement Kit P/N -
250034-124
(II) Secondary Element Replacement Kit P/N -
250034-130