Suez Sievers UPW Boron Analyzer, Operation And Maintenance Manual

Page: 55 / 104

SUEZ © 2018 55 of 104 DLM 71000-03 EN
Rev. B
Chapter 5: System Configuration
MESSAGES
The MESSAGES option allows you to view the error or warning messages.
1. To view error and warning messages press VIEW from the Main Menu .
2. Highlight MESSAGES by using the arrow keys. Pressing ENTER with MESSAGES option
highlighted will display the Analyzers log of error and warning messages.
• The message log is sorted by code number, which is shown in the upper-left corner of the
screen. The message log displays the last error or warning message that has occurred for the
code number shown. The number of times the error or warning message has occurred, the
date and time of the most-recent occurrence, and a brief description of the error or warning are
shown as well.
• The description field also contains a code for the severity of the error, where M = Maintenance,
W = Warning, and F = Fatal Error). When "0" for the # OF OCCURRENCES and "NOT
APPLICABLE" for LAST appear, no error or warning has occurred for the code number shown.
• The NEXT and PREV keys allow you to scroll through the message log by code number.
3. Press EXIT once to exit the message log and return to the previous menu, or twice to return to the
Main Menu .
For a more detailed description of error and warning messages, reviewChapter 9, "Message and Error
Codes" on page 97.
DEBUG
The DEBUG option is a diagnostic tool for viewing certain parameters within the Analyzer and should only
be accessed in the event of a firmware malfunction where you have been directed to view this information
by Technical Support or your local service provider.
SETUP
1. Press SETUP from the Main Menu to access the seven available setup options: MODE,
INSTRUMENT LOCATION, CLOCK, INPUT/OUTPUT, MAINTENANCE, STREAM SETUP , and
ADVANCED .
• The MODE option allows you set the mode of operation of the Analyzer.
• The INSTRUMENT LOCATION option allows you to specify the location of the Analyzer within
your facility.
• The CLOCK option allows you to set the date and time on the Analyzer.
• The INPUT/OUTPUT option allows you to setup the inputs and outputs on the Analyzer.
• The MAINTENANCE option lets you modify the status of the maintenance items.
• The STREAM SETU P option lets you setup the stream configuration.
• The ADVANCED option displays the advanced Setup menu, which provides diagnostics and
calibration constants setup.