Suez Sievers UPW Boron Analyzer, Operation And Maintenance Manual

Page: 51 / 104

SUEZ © 2018 51 of 104 DLM 71000-03 EN
Rev. B
Chapter 5: System Configuration
Soft Launch Keys
Within the firmware structure, the following terms and symbols are assigned to the soft launch keys:
ENTER : Accepts changes, calibration constants, or verification data, or select menu option.
EXIT : Returns to previous menu.
STOP : Halts current mode of operation.
START : Begins selected mode of operation.
NO : Responds to a question.
YES : Responds to a question.
PRINT : Prints information in selected format.
ABORT : Cancels an operation or reject calibration constants.
ACCEPT : Accepts an operation or calibration constants.
NEXT : Proceeds to next step in the procedure.
EDIT : Makes changes to existing settings.
AL # : Alarm Number
AN # : Analog Output Number
I # : Input Number
HELP : Provides simple instructions.
UP ARROW : Moves highlighted area up.
DOWN ARROW : Moves highlighted area down.
RIGHT ARROW : Moves highlighted area to the right or expands the selection.
LEFT ARROW : Moves highlighted area to the left or expands the selection.
Main Menu: Stopped State Options
When the Analyzer is turned on, the menu options (see Figure 10) that appear on the front panel display
are for the stopped state. The
Main Menu in the stopped state allows access to all other menus.