Suez Sievers UPW Boron Analyzer, Operation And Maintenance Manual

Page: 42 / 104

SUEZ © 2018 42 of 104 DLM 71000-03 EN
Rev. B
Chapter 3: Installation
4. Press the Edit soft key.
5. Use the Up and Down arrow keys to toggle to an Enabled state.
6. Press Enter .
7. Press Exit to return to the main screen for this stream.
8. Use the Next key to select the next stream and repeat as necessary.
9. When complete, press Exit three times to exit out to the main analysis screen.
Table 1 includes a list of default settings for many of the customizable features of the Analyzer. To modify
these settings, refer to the chapter of the manual identified with each parameter below. Some settings
apply only to multistream instruments, which are denoted with an asterisk.
Table 1: Default Settings
Parameter Default Setting Other Options To Modify
GENERAL SETTINGS
Mode Analysis
Cell Slope Calibration; Cell Offset
Calibration; Calibration; Verification
Chapter 5
Instrument Location None Customizable 14-character text field Chapter 5
Clock Date / Time in CO, USA Customizable Chapter 5
STREAM SETTINGS
Flush Time (applies
to all available
sample streams)
2 minutes
Recommended: 1 minute per 20’ of
tubing length on longest tubing run
Chapter 5
Sample Method
(applies to all
available sample
streams)
Individual
Averaged (in this mode, the Analyzer will
produce a numerical result that is the
average of 5 sequential analyses)
Chapter 5
Analysis Time
(applies to all
available sample
streams)
12 minutes
6.5 minutes (in this mode, the Analyzer
will produce a numerical result more
frequently, but the reagent will be
exhausted more quickly)
Chapter 5
Stream Name
Stream 1: Stream-1
Stream 2*: Stream-2
Stream 3*: Stream-3
Stream 4*: Stream-4
Customizable 12-character text field
(-x is appended to the end of the
customized field, where x indicates
the stream number 1, 2, 3 or 4)
Chapter 5