SUEZ © 2018
DLM 71000-03 EN
Rev. B
Chapter 3: Installation
Figure 1: UPW Boron Analyzer
Sample Water Considerations
•
Sample water resistivity greater than 15 MΩ-cm
•
Minimal water particulates (15-micron filters provided)
•
Flow rate between 0.05 and 0.2 L/min. per sample stream
•
Water pressure between 20 and 100 psi at the Analyzer
•
Maximum sample tubing length from water sampling point less than 100 feet
•
Sample point(s) within 50 feet of tubing run from Analyzer preferred
.
Note:
There is an additional pressure drop of up to 2.5 psi and sample delay of up to
3 minutes for each additional 50 feet of sample line tubing.
Summary of Contents for Sievers UPW Boron Analyzer
Page 4: ...SUEZ 2018 4 of 104 DLM 71000 03 EN Rev B THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 16: ...SUEZ 2018 16 of 104 DLM 71000 03 EN Rev B THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 103: ...Notes SUEZ 2018 103 of 104 DLM 71000 03 EN Rev B 104...
Page 104: ...Notes SUEZ 2018 104 of 104 DLM 71000 03 EN Rev B 104...
