I
NSTALLATION
.............................
Sievers M500e TOC Analyzer
Operation and Maintenance Manual
DLM 78510-02 EN Rev. B
98
SUEZ © 2022
Configuring an Ethernet Connection
To configure an Ethernet connection
Use this instruction to enable the Ethernet connection and set up a manual (fixed)
IP address or an automatic (dynamic) IP address.
After configuring the Ethernet connection:
•
To collect data, use a third-party data acquisition software or a SCADA system
with Modbus TCP/IP to support the collection of real-time instrument data and
status information. For more information, refer to
To collect serial data strings, refer to
•
To print to a PDF printer, configure the printer connection. For more information,
refer to
“Enabling a PDF Printer” on page 100
.
1. On the
Settings
s
screen, click the
Hardware
tab.
2.
On the scrolling menu, select
Ethernet Setup
and click
Run
. The
Ethernet
Setup
dialog box appears.
