SF-8200 Operation Manual
31
/
76
III SAMPLE MANAGEMENT
1. SAMPLE LOADING
1.1 SAMPLE INTERFACE
In the software display "sample" interface, you can add test tasks, view the sample test status,
set the sample entry information and other operations.
Refer to Chapter 2 to load the sample automatically.
Or in the software "sample" interface, manually load the sample. Click the sample bar, when it is
selected, the solid border will display. Click "Load", the "Sample Load" dialog box will pop up.
Attention! When adding a sample manually, verify that the selected position has been pushed
into the swath, and that the position is the correct one you are expecting, otherwise this may
result in incorrect test results.
Sample rack already loaded