www.ssilocators.com
o
peration
Practice listening, find an exposed pipe that's connected to a working faucet, place the sensor over the pipe and listen with
the faucet shot off, now, open the faucet and listen to the sound of running water, you'll begin to recognize the difference
between the two sounds. You should use the information displayed on the screen as a reference for frequency and noise
levels.
Play around with the predetermined filters that come standard with the unit to learn how to isolate the sounds that are
important for the water leak detection.
Follow the suggested steps to get your Aqua Trac™ ready for use in the field.
• Connect the Ground Microphone to the unit and secure the connection by tightening the threaded washer
• If you need to use the extension rod, thread it to the bottom of the sensor
• Plug-in the headphone jack to the unit.
• Turn the power on with the ON/OFF button located at the top of the unit.
r
eCognizing
d
ifferenCes
in
s
ounds
Increase Volume
Navigation Button
Decrease Volume
Navigation Button
Predetermine Filters
Custom Filter Settings
Headphone
Jack Connector
Sound Level Indicator
Battery Life Indicator
Volume Indicator
Settings
Access Settings
Navigation Button
Power charger
Plug-in
Access Filters
Navigation Button
Mute Button
Confirmation Button
Sensor/Microphone Connection
Power On/Off Button
Low Frequency Limit
High Frequency Limit