Black plate (405,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
5 minutes at 2,000 to 3,000 rpm.
9. Stop the engine and wait until the
coolant cools down [50 to 60
8
C (122 to
140
8
F)]. If there is any loss of coolant, add
coolant to the radiator
’
s filler neck and to
the reserve tank
’
s
“
FULL
”
level.
10. Put the radiator cap and reservoir cap
back on and tighten firmly.
Air cleaner element
The air cleaner element functions as a
filter screen. When the element is perfo-
rated or removed, engine wear will be
excessive and engine life shortened.
The air cleaner element is a dry type. It is
unnecessary to clean or wash the ele-
ment.
WARNING
Do not operate the engine with the
air cleaner element removed. The air
cleaner element not only filters
intake air but also stops flames if
the engine backfires. If the air
cleaner element is not installed
when the engine backfires, you
could be burned.
CAUTION
When replacing the air cleaner ele-
ment, we recommend that you use a
genuine SUBARU air cleaner ele-
ment. If it is not used, there is the
possibility of causing a negative
effect to the engine.
&
Replacing air cleaner ele-
ment
!
Non-turbo models
1. Use a screwdriver to undo the clips on
the air intake duct, then remove the air
intake duct.
Maintenance and service
11-27
–
CONTINUED
–
11
