Black plate (241,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
CD player operation (McIn-
tosh audio)
NOTE
.
Make sure to always insert a disc
with the label side up. If you insert a
disc with the label side down, it might
be ejected or the player might shut off.
.
If a disc is inserted during a radio
broadcast, the disc will interrupt the
broadcast.
.
After the last track finishes, the
changer will automatically return to
track 1 (the first track on the disc) and
start playback.
.
The CD changer is designed to
handle only 12 cm/5 inch CDs. Do not
attempt to use an 8 cm/3 inch CD.
Doing so could cause damage.
.
The CD changer is designed to be
able to play music CD-Rs and CD-RWs.
However, unsuitable recording proper-
ties, unsuitable disc properties,
scratches, dirt and other factors may
render it unable to play certain discs of
these types.
Also, the CD changer cannot play any
CD-R or CD-RW that has not been
finalized (processed for playability in
a normal CD player).
.
The CD changer cannot play CD-
ROMs.
.
The CD changer cannot display CD
text.
&
How to insert a CD
!
Inserting a CD
1. Briefly press the
“
LOAD
”
button. On
the display, the disc number assigned to
the disc you are going to insert and the
“
LOAD
”
indicator will blink.
2. As soon as the
“
LOAD
”
indicator
begins to blink, insert the disc. The disc
will be automatically drawn in, and the
player will begin to play back the first track
on the disc.
.
The disc indicator continuously illumi-
nates if a disc is already inserted in the
corresponding position in the magazine.
.
If you press either of the other mode
buttons (
“
FM
”
or
“
AM
”
) while the player is
in the loading mode, the player will enter
the standby mode. Press the
“
DISC
”
button to start playback.
!
To insert multiple CDs one after
another
1. Press the
“
LOAD
”
button for 1 second
or longer. You will hear a beep.
2. The display will show
“
ALL LOAD
”
.
3. Insert the CDs one at a time.
4. Playback will begin with the CD that
was inserted first.
Audio
5-29
–
CONTINUED
–
5
