Subaru Legacy Outback 2006, Owner'S Manual

Page: 144 / 456

Instruments and controls
3-37
– CONTINUED –
T
Wiper intermittent time control
When the wiper switch is in the “ ” po-
sition, turn the dial to adjust the operating
interval of the wiper.
Two click stop positions of the dial may
help you to aim at your desired interval.
The operating interval can be adjusted in
nine steps.
T
Mist (for a single wipe)
For a single wipe of the wipers, pull the le-
ver toward you. The wipers operate until
you release the lever.
T
Washer
To wash the windshield, push the washer
button at the end of the wiper control le-
ver. The washer fluid sprays until you re-
lease the washer button. The wipers oper-
ate while you push the button.
„
Rear window wiper and wash-
er switch (Station wagon)
The wiper operates only when the ignition
switch is in the “ON” or “ACC” position.
: Washer (accompanied by wiper
operation)
ON : Continuous
INT : Intermittent
OFF : Park
: Washer
T
Rear wiper
To turn the rear wiper on, turn the knob on
300287 300288
300289
300290