Subaru Legacy 2021, Owner'S Manual

Page: 471 / 592

(467,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
transport your vehicle on a flat-
bed truck.
. Use a flat-bed truck if there are
long distance downgrades or
steep slopes. However, do not
apply the brake pedal for a long
time because the engine braking
will not work while towing. Doing
so could overheat the brake.
. Drive carefully and do not make
an impact on the towing rope by
suddenly starting.
. Use a specific towing rope for
towing. If wire ropes and metal
chains are needed to be used for
towing, wrap the contact portion
of the bumper with cloth to pro-
tect it from damage.
1. Release the parking brake and put the
transmission in neutral.
2. The ignition switch should be in the
“ON” position while the vehicle is being
towed.
3. Take up slack in the towline slowly to
prevent damage to the vehicle.
9-8. Electronic Parking Brake
– If the Electronic Parking
Brake Cannot Be Released
Contact your SUBARU dealer and have
your SUBARU dealer release the electro-
nic parking brake.
9-9. Access Key Fob – If Ac-
cess Key Fob Does Not Op-
erate Properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from the area between the
access key fob and the push-button
ignition switch. They may interfere
with the communication between
the access key fob and the push-
button ignition switch.
The following functions may be inoperable
because of strong radio signals in the
surrounding area or a low battery condition
of the access key fob.
. Locking/unlocking doors including rear
gate
. Switching power status
. Starting engine
In such cases, perform the following
procedure. When the battery of the access
key fob is discharged, replace it with a new
one. Refer to “Replacing Battery of Access
Key Fob”
F P526.
– CONTINUED –
Electronic Parking Brake – If the Electronic Parking Brake Cannot Be Released
465
9
In
Case
of
Emergency