Subaru Legacy 2021, Owner'S Manual

Page: 409 / 592

(405,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
the following indicator(s) will illuminate.
The RAB OFF indicator will turn off when
the corresponding function is turned ON.
NOTE
When the settings cannot be changed,
the ON/OFF setting key will be grayed
out.
Also, the following settings can be chan-
ged by operating the center information
display.
. Warning volume
. Sonar audible alarm
For details, refer to “Car settings” F P220.
& RAB Warning Indicator
1) RAB malfunction message
2) RAB warning indicator
If the Reverse Automatic Braking (RAB)
system malfunctions, the above indicator
illuminates on the combination meter.
Contact the nearest SUBARU dealer for
details.
& Handling of the Sonar Sen-
sors
The 4 sonar sensors are located in the rear
bumper. To ensure the proper operation of
the Reverse Automatic Braking (RAB)
system, observe the following precau-
tions.
. Do not affix any stickers or other items
on the sonar sensor or the bumper surface
near the sonar sensors.
. Always keep the sonar sensor and the
rear bumper surface near the sonar
sensors clean.
. Do not modify rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply high pressure water to the
sonar sensors with a high pressure car-
washing machine.
. Do not apply strong impacts to the rear
bumper near the sonar sensors. If a sensor
becomes misaligned, a system malfunc-
tion may occur, including inability to detect
objects in the reversing direction. If any
strong impact is applied to the rear
bumper, contact a SUBARU dealer to
– CONTINUED –
Reverse Automatic Braking (RAB) System
403
7
Starting
and
Operating