Subaru Impreza 2016, Manual

Page: 180 / 600

Black plate (184,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
3-50
Instruments and controls/Multi function display
By operating the
“ ”
or
“ ”
switch on the
steering wheel, you can select the menu.
Pull the
“
/SET
”
switch to enter the
selected menu.
NOTE
If you enter the
“
Go Back
”
menu, the
system will return to the previous
screen.
!
Screen Settings
After entering the
“
Screen Settings
”
menu,
select one of the following menus.
!
Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
“
On
”
to activate the screens. Select
“
Off
”
to deactivate the screens.
!
Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the
“
ON
”
position can be activated or deactivated.
Select
“
On
”
to activate. Select
“
Off
”
to
deactivate.
!
Languages
Operate the
“ ”
or
“ ”
switch on the
steering wheel to display the preferred
language. Then pull the
“
/SET
”
switch to
select the displayed language.
Multi function display (if
equipped)
NOTE
For models with information display
(black and white), refer to
“
Information
display
” F
3-39.
&
Safety precautions
WARNING
Always pay adequate attention to
safe driving when operating the
multi function display while the
vehicle is in motion. When operation
of the multi function display is
disturbing your awareness and abil-
ity to concentrate on driving, stop
the vehicle in a safe place before
performing operations on the
screen. Also, do not concentrate
on the display while driving. Doing
so may cause you to look away from
the road and could result in an
accident.
NOTE
When the vehicle is in motion, certain
functions and selections may not be