Subaru Forester Manual Download Page 266

Page: 266 / 397

Black plate (273,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

desired speed, press the

“

SET/COAST

”

button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.

Cruise control indicator light

The cruise control indicator light illumi-
nates when the ignition switch is turned to
the

“

”

position and turns off after

approximately 3 seconds.
The light illuminates when the

“

CRUISE

”

main switch is pressed.

NOTE

If you press the

“

CRUISE

”

main

switch button while turning the ignition
switch

“

”

, the cruise control func-

tion is deactivated and the cruise

control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the

“

Acc

”

“

LOCK

”

position, and then

turn it again to the

“

”

position.

If this indicator light and the mal-

function indicator lamp

“

”

flash

simultaneously during driving, we re-
commend that you have the vehicle
checked by your nearest SUBARU
dealer.

Cruise control set indicator
light

The cruise control set indicator light
illuminates when the ignition switch is
turned to the

“

”

position and turns off

after approximately 3 seconds.

The light illuminates when vehicle speed
has been set.

Starting and operating

7-41

Summary of Contents for Forester














































































































































































































































































































































































































Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands

Subaru Forester, Manual

Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands