Black plate (126,1)
一
般
Model "A8140GE-A" EDITED: 2007/ 12/ 13
3-4
Instruments and controls
&
Acc
In this position the electrical accessories
(radio, cigarette lighter, etc.) can be used.
&
ON
This is the normal operating position after
the engine is started.
&
START
The engine is started in this position. The
starter cranks the engine to start it. When
the key is released (after the engine has
started), the key automatically returns to
the
“
ON
”
position.
CAUTION
Do not turn the ignition switch to the
“
START
”
position while the engine
is running.
As your vehicle is equipped with an
immobilizer system, if you fail to start your
engine with your registered key, pull out
the key once, (at this time, the immobilizer
indicator light blinks) and then insert the
key in the ignition switch and turn it to the
“
START
”
position and again try to start
your engine.
NOTE
The engine may not start in the follow-
ing cases:
.
The key grip is touching another key
or a metallic key holder.
.
The key is near another key that
contains an immobilizer transponder.
.
The key is near or touching another
transmitter.
&
Key reminder chime (if
equipped)
The reminder chime sounds when the
driver
’
s door opens and the key is in the
“
LOCK
”
or
“
Acc
”
positions. The chime
stops when the key is removed from the
ignition switch.
&
Ignition switch light
For easy access to the ignition switch in
the dark, the ignition switch light illumi-
nates when any of the doors are opened.
The light remains illuminated for a several
seconds and gradually turns off after all
doors are closed or if the key is inserted in
the ignition switch.
The ignition switch light also can be turned
on by use of the keyless entry transmitter.
Refer to the
or
section in chapter 2 for
detailed information.
