Subaru 2015 Outback Manual Download Page 325

Page: 325 / 610

Black plate (333,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

Voice command system op-
eration

Voice command system

The voice command system enables the
audio, hands-free systems, etc. to be
operated using voice commands.
Refer to the

“

Command list

”

5-104 for

samples of voice commands.

Using the voice command system

Steering switch

Talk switch

Press the talk switch to start the voice

command system.

To cancel voice recognition, press and

hold the talk switch.

Microphone

It is unnecessary to speak directly into

the microphone when giving a command.

NOTE

Wait for the confirmation beep be-

fore speaking a command.

Voice commands may not be recog-

nized if:

–

Spoken too quickly.

–

Spoken at a low or high volume.

–

The roof or windows are open.

–

Passengers are talking while

voice commands are spoken.

–

The air conditioning speed is set

high.

–

The air conditioning vents are

turned towards the microphone.

In the following conditions, the sys-

tem may not recognize the command
properly and using voice commands
may not be possible:

–

The command is incorrect or

unclear. Note that certain words,
accents or speech patterns may be
difficult for the system to recognize.

–

There is excessive background

noise, such as wind noise.

Voice command system operation

1. Press the talk switch.

After the voice command top screen

has been displayed, speech guidance
will commence.

Audio/Voice command system operation

5-101

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands