Subaru 2015 Outback Manual Download Page 316

Page: 316 / 610

Black plate (324,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

5-92

Audio/Phone operation (Hands

–

free system for cellular phones)

By off hook switch

Calls can be made using the latest call
history item.
1. Press the

switch on the steering

wheel to display the phone top screen.
2. Check that the

“

Call (Call)

”

screen is

displayed.

Receiving on the Bluetooth
phone

Incoming calls

When a call is received, the incoming call
screen is displayed with a sound.

When you are on the Outgoing Call

screen, the screen changes to the Call
screen when the other party answers the
call.

The

“

Mute

”

“

Speaker

”

, and

“

Bluetooth

”

keys are disabled on the Outgoing Call
screen.

When you receive a phone call while

the cellular phone is connected, the
screen changes to the Incoming Call
screen.

Incoming Call screen

Unable to put call on hold screen

No.

Function

“

Option

”

key: Opens the Options

(volume settings) screen.

No.

Function

“

Hold

”

key: Puts the incoming call on

hold. This function may not work on
some cell phone models. This func-
tion is the same as pressing the

“

ON_Hook

”

switch on the steering

wheel for a short period of time.

“

OFF_Hook

”

key: Opens the Call

screen. This function is the same as
pressing the

“

OFF_Hook

”

switch on

the steering wheel.

“

ON_Hook

”

key: Rejects the incoming

call. This function is the same as
pressing and holding the

“

ON_Hook

”

switch on the steering wheel.

NOTE

During international phone calls, the

other party

’

s name or number may not

be displayed correctly depending on
the type of cellular phone you have.

Depending on the type of Bluetooth

phone, both the system and Bluetooth
phone may sound simultaneously
when there is an incoming call. Refer
to

““

Sound Settings (Sound Settings)

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands