Black plate (217,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
!
Power folding mirror switch (if
equipped)
The power folding mirror switch operates
only when the ignition switch is in the
“
ON
”
or
“
ACC
”
position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
.
If the outside mirrors have been
operated (folded or unfolded) manually,
when you turn the ignition switch from
the
“
LOCK
”
/
“
OFF
”
position to the
“
ACC
”
or
“
ON
”
position, the outside
mirrors may be adjusted automatically
depending on the status of the power
folding mirror switch.
.
If the outside mirrors have been
manually folded slightly forward of the
regularly unfolded position, when you
turn the ignition switch from the
“
LOCK
”
/
“
OFF
”
position to the
“
ACC
”
or
“
ON
”
position, the outside mirrors
may automatically fold further forward
depending on the status of the power
folding mirror switch. When this hap-
pens, press the power folding mirror
switch. By doing so, the outside mir-
rors which have been folded to the
furthest forward position will extend to
the regularly unfolded position and
then fold rearward in the usual way. In
order to unfold the outside mirrors,
press the switch again.
.
When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by operat-
ing the switch again.
.
When the temperature is low, the
outside mirrors may stop during opera-
tion. Push the switch again. When the
outside mirrors do not work by operat-
ing the switch, move the outside mir-
rors several times manually. This
makes it possible to operate them by
switch operation.
.
When you operate the power folding
mirror switch continuously, it may not
work. This is not a malfunction. Oper-
ate after waiting for a short period of
time.
Instruments and controls/Mirrors
3-67
3
