Black plate (196,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
3-46
Instruments and controls/Multi information display
.
Detection is not possible
Select
“
On
”
to activate the buzzer. Select
“
Off
”
to deactivate the buzzer.
!
Lead Vehicle Moving Monitor
Function
When adaptive cruise control is used, the
buzzer that sounds if a vehicle in front has
started can be activated or deactivated.
Select
“
On
”
to activate the buzzer. Select
“
Off
”
to deactivate the buzzer.
!
Vehicle Icon
The vehicle icon indication can be acti-
vated or deactivated. Select
“
On
”
to
activate. Select
“
Off
”
to deactivate.
!
Vehicle Setting
After entering the
“
Vehicle Setting
”
menu,
select one of the following menus.
!
Keyless Entry System
You can change some of the settings of
the remote keyless entry system (all
models) and keyless access with push-
button start system (if equipped).
After entering the
“
Keyless Entry System
”
menu, select one of the following menus.
.
Audible Signal:
The audible signal can be activated or
deactivated. Select
“
On
”
to activate. Se-
lect
“
Off
”
to deactivate.
.
Hazard Warning Flasher:
The hazard warning flasher operation can
be activated or deactivated. Select
“
On
”
to
activate. Select
“
Off
”
to deactivate.
.
Security Relocking:
The automatic locking operation period
can be set or customized. Select the
preferred seconds to customize the op-
eration period. Select
“
Off
”
to deactivate
the operation.
.
Driver Door Unlock:
The door unlock selection function for the
driver
’
s door can be activated or deacti-
vated. Select
“
On
”
to activate. Select
“
Off
”
to deactivate.
.
Rear Gate/Trunk Unlock:
The door unlock selection function for the
rear gate/trunk can be activated or deac-
tivated. Select
“
On
”
to activate. Select
“
Off
”
to deactivate.
!
Defogger
The defogger and deicer system can be
set for the continuous operation mode or
automatic shut-off mode. Select
“
Contin-
uous
”
to select the continuous operation
mode. Select
“
15 minutes
”
to select the
automatic shut-off mode.
!
Interior Light
The setting for the period of time in which
the interior lights remain on (OFF delay
timer) after closing the doors and/or the
rear gate can be set or customized. Select
the preferred seconds to customize the
operation period. Select
“
Off
”
to deactivate
the OFF delay timer.
!
Auto Light Sensor
The operational sensitivity of the auto on/
off headlights can be set. You can select
“
Max
”
,
“
Mid
”
,
“
Low
”
or
“
Min
”
.
!
Default Settings
Select
“
Yes
”
to use the menu screen to
restore customized settings to the factory
default settings. Select
“
No
”
to return to
the previous screen without restoring to
the factory default settings.
