Subaru 2013 Forester, Owner'S Manual

Page: 35 / 529

Black plate (37,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
1) HIGH
–
Rapid heating
2) LOW
–
Normal heating
3) Off
A) Left-hand side
B) Right-hand side
To turn on the seat heater, push the
“
LOW
”
or
“
HIGH
”
position on the switch, as
desired, depending on the temperature.
Selecting the
“
HIGH
”
position will cause
the seat to heat up quicker.
To turn off the seat heater, lightly press the
opposite side of the current position.
The indicator located on the switch illumi-
nates when the seat heater is in operation.
When the vehicle
’
s interior is warmed
enough or before you leave the vehicle,
be sure to turn the switch off.
Rear seats
WARNING
Seatbelts provide maximum re-
straint when the occupant sits well
back and upright in the seat. Do not
put cushions or any other materials
between occupants and seatbacks
or seat cushions. If you do so, the
risk of sliding under the lap belt and
of the lap belt sliding up over the
abdomen will increase, and both can
result in serious internal injury or
death.
Seat, seatbelt and SRS airbags/Rear seats
1-7
–
CONTINUED
–
1