Subaru 2013 Forester, Owner'S Manual

Page: 228 / 529

Black plate (230,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
3-100
Instruments and controls/Wiper and washer
high speed position.
–
The wipers may not operate if the
temperature around the rain light
sensor is more than 80
8
C (176
8
F)
because the system cannot detect
the amount of raindrops under
these temperatures.
.
This system is also equipped with
the vehicle speed interlocking intermit-
tent wiper function. When the vehicle
stops, the wiper operation interval will
become longer compared with that
while driving.
.
This system may malfunction in a
location with strong radio waves or
noise.
&
Windshield wiper and washer
switches
The wiper operates only when the ignition
switch is in the
“
ON
”
position.
!
Windshield wipers (models with
automatic rain sensing windshield
wipers)
Except Australia models
Australia models
/ MIST: Mist (for a single wipe)
/ OFF: Off
/ AUTO: Automatic operation
/ LO: Low speed
/ HI: High speed
To turn the wipers on, push the wiper
control lever down. With the wiper switch
in the
“
AUTO
”
position, the wipers operate
automatically when the rain light sensor
detects falling rain. The wiper timing is
automatically adjusted depending on the
amount of rain.
To turn the wipers off, return the lever to
the
“
OFF
”
/
“ ”
position.
For a single wipe of the wipers, push the
lever up. The wipers operate until you
release the lever.