Subaru 2012 Legacy, User Manual

Page: 29 / 474

Black plate (30,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
1-6
Seat, seatbelt and SRS airbags
&
Head restraint adjustment
1) Head restraint
2) Release button
Both the driver
’
s seat and the front
passenger
’
s seat are equipped with head
restraints.
The head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant
’
s ears.
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while
pressing the release button on the top of
the seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks.
WARNING
.
Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Therefore, when
you remove the head restraints,
you must reinstall all head re-
straints to protect vehicle occu-
pants.
.
All occupants, including the dri-
ver, should not operate a vehicle
or sit in a vehicle
’
s seat until the
head restraints are placed in their
proper positions in order to mini-
mize the risk of neck injury in the
event of a crash.
Seat heater (if equipped)
1) HIGH
–
Rapid heating
2) LOW
–
Normal heating
3) OFF
–
Off
A) Left-hand side
B) Right-hand side