Subaru 2012 Legacy, User Manual

Page: 142 / 474

Black plate (143,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
&
Cruise control indica-
tor light
This light illuminates when the
“
CRUISE
”
main switch is pressed to activate the
cruise control function.
NOTE
.
If you press the main switch button
while turning the ignition switch
“
ON
”
,
the cruise control function is deacti-
vated and the
“
CRUISE
”
indicator light
flashes. To reactivate the cruise control
function, turn the ignition switch back
to the
“
Acc
”
or
“
LOCK
”
position, and
then turn it again to the
“
ON
”
position.
.
If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator light flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
&
Cruise control set in-
dicator light
This light illuminates when vehicle speed
has been set to use the cruise control
function.
&
Headlight indicator
light
This indicator light illuminates under the
following conditions.
.
when the light switch is turned to the
“ ”
or
“ ”
position
.
when the light switch is in the
“
AUTO
”
position and the headlights illuminate
automatically
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
Clock
NOTE
Your SUBARU dealer can change the
settings of activating/deactivating the
automatic adjustment of the clock by
the GPS (Global Positioning System)
(for models with the genuine SUBARU
navigation system). Contact your
SUBARU dealer for details.
The clock shows the time while the
ignition switch is in the
“
Acc
”
or
“
ON
”
position.
To adjust the time shown by the clock,
press the
“
+
”
button or the
“ − ”
button. If
you press the
“
+
”
button, the indicated
time will change in one-minute incre-
ments. If you press the
“ − ”
button, the
Instruments and controls
3-23
–
CONTINUED
–
3