Subaru 2004 Forester, Service Manual

Page: 238 / 622

SB-12
SEAT BELT SYSTEM
Rear Seat Belt
5. Rear Seat Belt
A: REMOVAL
1. OUTER BELT SIDE
1) Remove the luggage floor mat. <Ref. to EI-50, RE-
MOVAL, Luggage Floor Mat.>
2) Remove the rear seat. <Ref. to SE-13, REMOV-
AL, Rear Seat.>
3) Remove the rear quarter trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
4) Remove the seat belt lower anchor bolt.
5) Remove the anchor cover. Remove the bolt and
shoulder anchor from pillar.
6) Remove the rear quarter trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
7) Remove the bolts, and then detach the outer belt
side.
8) Remove the two bolts and adjustable anchor as-
sembly.
2. OUTER BELT CENTER
1) Remove the anchor cover. Remove the bolt and
then detach the shoulder anchor from pillar.
2) Remove the strut cap. <Ref. to EI-45, REMOV-
AL, Rear Quarter Trim.>
3) Remove the rear rail trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
4) Remove the rear pillar upper trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
5) Remove the rear skirt trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
6) Remove the rear quarter lower trim. <Ref. to EI-
45, REMOVAL, Rear Quarter Trim.>
7) Remove the cover (B) while detaching snap lock
carefully. Put the outer belt center tongue (A) out to
the other side of the trim through the hole.
8) Remove the clips and hang down rear end of
roof trim.
SB-00008
SB-00009
SB-00010
SB-00011
SB-00009
SB-00012