Subaru 2003 Legacy, Service Manual

Page: 2199 / 4441

AT-84
AUTOMATIC TRANSMISSION
OIL CHARGER PIPE
23.Oil Charger Pipe
A: REMOVAL
1) Remove the air cleaner case. (2.0 L non-TURBO
and 2.5 L models)
<Ref. to IN(H4SO)-6, REMOVAL, Air Cleaner
Case.>
2) Remove air intake chamber. (3.0 L model)
<Ref. to IN(H6DO)-6, REMOVAL, Air Intake Cham-
ber.>
3) Remove intercooler. (TURBO model)
<Ref. to IN(H4DOSTC)-13, REMOVAL, Intercool-
er.>
4) Remove the oil charger pipe, and remove the O-
ring from the flange face.
B: INSTALLATION
1) Install the oil charger pipe with new O-ring.
Tightening torque:
41 N·m (4.2 kgf-m, 30.4 ft-lb)
2) Install the air cleaner case. (2.0 L non-TURBO
and 2.5 L models)
<Ref. to IN(H4SO)-6, INSTALLATION, Air Cleaner
Case.>
3) Install air intake chamber. (3.0 L model)
<Ref. to IN(H6DO)-6, INSTALLATION, Air Intake
Chamber.>
4) Install intercooler. (TURBO model)
<Ref. to IN(H4DOSTC)-14, INSTALLATION, Inter-
cooler.>
C: INSPECTION
Make sure the oil charger pipe is not deformed or
otherwise damaged.
(A) Oil level gauge
(B) Oil charger pipe
AT-00808
( A )
( B )
(A) Oil level gauge
(B) Oil charger pipe
AT-00808
( A )
( B )