Sub-Zero 4204490 Manual Download Page 1

 

 

Thank you for purchasing an authentic 

Sub-Zero 4204490 Water Filter

 from 

Home 

Appliance Specialists.

 We work directly with Sub-Zero to make sure we only sell 

authentic and genuine appliance parts. Beware of other sellers who may purchase water 
filters from third party dealers who cannot guarantee authenticity. Also, make sure to 
only use Sub-Zero branded cartridges in your fridge. Any use of third party branded 
water filters can and will cause problems to your unit and may void your warranty.  

How to Access the Water Filter 

 

Built-In (BI) or PRO48 Series unit, pull out on the bottom edge of the grille 
assembly, and tilt the grille frame forward. 

 

New Generation Integrated unit, remove the kick plate screws at the bottom of the 
unit and tilt the kick plate out and off of the unit. 

How to Remove the Water Filter 

 

Rotate the cartridge counterclockwise one-quarter turn, and then pull it out. 

 

There is water in the filter cartridge, so it is normal for a small amount to spill out. 

How to Replace the Water Filter 

 

Remove the new filter cartridge from its packaging and carefully remove the 
plastic cap.  

 

Insert the new filter into the manifold and turn clockwise until the filter is seated.  

How to Reset the Water Filter 

 

Built-In (BI)

 models: Once the filter cartridge has been replaced, press and hold 

the filter reset button (located to the left of the water filter) for five seconds in 
order to reset the water filter life monitor. 

 

648PRO

 models: Once the filter cartridge has been replaced, the control 

automatically resets; the water filter life monitor and the "REPLACE FILTER" 
indicator will no longer be displayed. 

 

New Generation

 

Integrated

 models:  

o

 

Access the options menu by pressing the arrow on the left side of the 
home screen  

o

 

Access the settings menu by pressing the gear icon on the options menu.  

o

 

Select the ‘I’ icon to access the information menu 

o

 

Click ‘Filters’ to access the water and air filters menu.  

o

 

Press and hold the dripping water icon on the far left for 5 seconds to 
select the water filter settings.  

o

 

Continue by following the same steps below for when the change filter 
message is present.  

o

 

Click ‘Filters’ to access the water and air filters menu.  

 

Reviews: