safety glasses
5/32 alan wrench
1. Turn the chair on its back to reveal
the aluminum 4 blade swivel base.
Start by using a 5/32 allen key to re-
move the 1/4-20 Shoulder head cap
screw. When the screw is removed
pull up the base to seperate it from
the spigot (figure A1).
3. Finally, seperate the arms and spigot
from the carraige useing the 5/32
allen key (figure C1).
2. After removing the base from the
chair, use the same allen key to
unscrew the screws holding the
aluminum carriage onto the shell.
(figure B1).
www.stylexseating.com
800.257.5742
Disassembly Verve 08/18/16
- Seat Shell
- Material:
Polypropylene, foam
upholstery
Tools Required
Disassembly and Recycling Document
Disassembly Time: 5min / No Special Training Required
Breakdown Steps
Model: Verve with 4 Blade base
*Refer to P.2 for model variations
- 4 Blade Base
- Material: Aluminum
- Phillips button-head (1/4 20 bolt)
- Material: Steel
x1
x4
x4
P.1
- Carriage
- Material: aluminum, steel
- Washers
- Material: Steel
x4
- Socked Head shoulder Screw
- Material: Steel
- Washer
- Material: Steel
- Casters
- Material: Steel, Nylon
A1
B1
C1