41
© STULZ GmbH – all rights reserved EN/11.2018/G67C
wib8000 original instructions
Appendix
A1. Software update
From version 1.20 a software update can be done by the
web browser in the menu "Web Interface/Service/soft-
ware update".
Using the download links "general settings" and "zone set-
tings" you can save the configuration files "settings2" and
"zonedata" from the WIB8000 on the PC.
Using the „Browse“ button, choose the new firmware
image file which you downloaded before from the e-Stulz
area of the Stulz website on the hard disk of your PC.
Use the "Send" button to transfer this file from the PC to
the WIB8000.
As soon as the page is refreshed the upload is terminated.
A restart is necessary (e.g. by the menu "WIB interface/
Reboot") to activate the new firmware.
In case the configuration files were damaged during the
update, these can be loaded onto the WIB8000 using the
upload function as for the firmware. Here also a restart is
necessary to activate the files.
download of a configuration file
