28
Free-AIr-3-IN
EN/02.2018 © STULZ SpA – all rights reserved
9. Uninstalling and disposal of the
unit
Dismantling of this unit must always be done by expert and authorized personnel.
DANGer
Before starting to dismantle the unit check that it has been disconnected from electric power
supply and secure it against being switched on again.
Move the unit as described in paragraph "Lifting and transport", with a lifting device of suitable
capacity. The unit must be stored where it is protected from weather while it is awaiting disposal.
Below the instructions for proper disposal of the unit during the various phases of its life. For further
clarification or additional information, please contact [email protected].
INFOrMATION
To ensure proper and safe disposal activities, operator must equip themselves with the
necessary PPE including: anti-cut gloves, oil resistant gloves, heat resistant gloves, safety
footwear, safety eyewear against liquid and gas splashes.
The context in which the unit is located may require the use of additional PPE, thus it is
mandatory to inquire with the relevant staff of the area before starting operation.
Once the materials have been separated as shown below, they should be assigned EWC codes and
then sent for disposal in accordance with the national legislation.
Disposal related to the unit purchased occurs in three stages:
1. Disposal of packaging
The packaging of the unit must be disposed of ensuring separation of the following materials:
• Paper and Cardboard
• Wood Packing–Packing materials are not chemically treated unless they are declared to be
“fumigate”
• Plastic pallets- high- density polyethylene HDPE
• Plastic Film– polyethylene PE
• Polystyrene –expanded polystyrene EPS 6
2. Disposal of substances during maintenance operations
3. Disposal at the end of life of the unit
The unit must be disposed of ensuring separation of the following materials:
• Metals
• Insulation and sound-absorbing materials
• Electric and electronic components
• Cables and wiring
• Plastic Parts - Plastic parts that are important in terms of weight are the following: