Stulz ENS 14 A Technical Manual Download Page 48

Page: 48 / 110

DE / 06-2016 / 1000687

Installation

STULZ UltraSonic -System for duct humidification ENS 14 A - 18 A-

7.4.2. Waste water connection

Ultrasonic humidifiers from the ENS model series have two waste water connections.

CAUTION

Pressureless drainage.

The humidifier drains without pressure.

●

Make sure the outlet allows free drainage.

Note

CAUTION

Flush valve.

Only install the flush valve in the DRAINAGE PIPE!

Note

CAUTION

Contaminated water pipes.

Filings and dirt must not get into water pipes!

●

All pipes must be cleaned before they are connected to the unit.

IMPORTANT

CAUTION

Position of valves.

Always install valves below the unit.

IMPORTANT

CAUTION

Direction of flow of solenoid valve.

Pay attention to the direction of flow when fitting the solenoid valve.

IMPORTANT

CAUTION

Resistant materials.

The connection between the demineralization system and the humidifier must consist of a material that

is resistant to demineralized water.

●

Only use approved materials. See "4.7. Application limits" on page 20.

IMPORTANT

CAUTION

Regulations from water supply companies.

Regulations from water supply companies must be complied with.

WARNING

Summary of Contents for ENS 14 A















































































































Search results

Summary of Contents for ENS 14 A

Reviews:

Brands by name

Popular brands

Stulz ENS 14 A, Technical Manual

Search results

Summary of Contents for ENS 14 A

Reviews:

Brands by name

Popular brands