Instruction Manual
Stereo Power Amplifier
Model: XJA 2600
For reliable and trouble free operation, please observe the following points:
• Ensure all input/output connections are correct and secure.
• The handling capacity of the loudspeakers is adequate for the output of the amplifier.
• Always install the amplifier in a well ventilated location.
• Protect unit from severe shocks.
4. Turn gain controls to minimum, switch on the amplifier and the Green power LED will illuminate.
5. Adjust gain controls to required level. NOTE. If the audio input signal is too high, distortion will result and the CLIP indicator
will light. If the clip LED is lit permanently or flashes, the gain level should be reduced.
6. Protect LED. These power amplifiers feature unique DC, thermal protection circuit.
1. Connect loudspeaker system with sufficient handling capacity to the output terminals of the amplifier.
2. Connect output from mixer ( or any other suitable signal source) to the appropriate input sockets of the power amplifier.
NOTE. All inputs are BALANCED and connections for the XLR input are Pin 1 = GND, 2=HOT, 3= COLD
3. Connect the power cord to the mains.
OPERATION
Rev002/SM XJA 2600/A
UGUST 2016
Do not attempt to make any repairs yourself. This would
your warranty.
void
Do not make any changes to the unit. This would also
your warranty.
void
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of
the warnings contained in this manual. Studiomaster Professional can not be held responsible for personal
injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all
damages in whatever form.
PRODUCT OF AUDIOPLUS
Studiomaster Professional reserves the right to make modifications to its products without notice
A1/A2, Giriraj Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai - 400 093. India
Tel.: +91-22-42869043 / 4286 9076 / Fax: +91-22-26871453 Whats App.: +91-8888887049
E [email protected] W www.studiomasterprofessional.com / www.audioplus-india.com
STEREO POWER AMPLIFIER
XJA 2600
ON
PROTECT A
PROTECT B
CLIP
CLIP
SIGNAL
SIGNAL
BASS BOOST
POWER
CH A
CH B
0
10
0
10
I
O
AC
2 3 0
AV
TEMP
°C
0 2 8
TEMP
°C
0 2 8
R
L
SPECIFICATIONS
Stereo
Model
Bridged
8
(1800W RMS)
Ω
4Ω (1700W RMS)
4Ω (2000W EIA)
8
(3000W EIA)
Ω
8
(2 x 600W RMS)
Ω
2Ω (2 x 850W RMS)
4Ω (2 x 900W RMS)
4
(2 x 1500W EIA)
Ω
2Ω (2 x 1000W EIA)
8
(2 x 825W EIA)
Ω
XJA 2600
Input Impedance
Protection
Indicators
Dimensions (WxDxH)
Power Supply
Net Weight in Kg
Single channel driven
Damping factor
Frequency Response
Cooling
Input Connector (per channel)
Output Connector (per channel)
Power, Signal, Clip, Bass boost & Protect
4
(1100W RMS)
Ω
2Ω (900W RMS)
8
(700W RMS)
Ω
4
(1800W EIA)
Ω
2Ω (1100W EIA)
8
(900W EIA)
Ω
>350:1 (8 )
Ω
20Hz-20KHz (-3dB)
20K
Balanced/10K
Unbalanced
Ω
Ω
Temperature, DC, short circuit
XLR, Jack Stereo 6.3mm
2 x Variable Speed fans (80MM)
20 kg
482 x 88 x 456mm (2U)
Speak-on connector/Binding Posts/6.3mm jack
240V~50Hz, 2500W
A series of high output, high quality stereo power amplifiers offering greater reliability for a wide
range of Clubs, Stage and P.A. applications.
Features. . .
• Lightweight, Rugged & Reliable Stereo Power Amplifier.
• Output: Speakon, 6.3mm jack socket & Binding Post Connectors.
• EQ Processing, Low Cut, Subwoofer on rear Panel.
• Temperature controlled Fans.
• 19” 2U Rack Mountable design.
• Input: Balanced XLR & 1/4” Jack.
• Level Control & LED indicators (Power, Signal, Clip, Bass Boost & Protect) on front panel.
• Stereo, Bridge & Parallel Mode Selection Switch.
• Protection: Temperature DC, Short Circuit.
• Mains voltage operation 220VAC-240VAC as well as Low Voltage Operation (150VAC).
• Backlit LCD display with features,
- Mains voltage indication.
- Output level meter.
- Fan speed indication.
- Heatsink temperature indication.
• Elegant extended dial plate.
