Model 5402 User Guide
Issue 3, August 2021
Studio Technologies, Inc.
Page 49
Model 5402
DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION
Appendix C–Dante Controller Network Default
Configuration Values
Dante Interface Default Values:
Device Config, Sample Rate: 48k
Device Config, Clocking, Unicast Delay Requests: Disabled
Device Config, Device Latency: Latency: 1.0 msec
Network Config, Switch Configuration, Current: Switched
Network Config, Addresses: Obtain an IP Address Automatically (default)
AES67 Config, AES67 Mode, Current: Disabled
Leader Clock, Preferred Leader: Enabled
Leader Clock, Enable Sync to External: Enabled
