Studer Vista 5 M3 Page 512 Operating Instructions Manual Download

Page: 512 / 564

Vista 5 M3 Digital Mixing System

7-8 DAW Control

Document generated: 28.08.13

SW V4.9

MIDI communication speed rtpMIDI allows to increase the communication speed. In order to change this

parameter proceed as follows :

• Open rtpMIDI, press and hold CTRL, and double-click with the left

button into the empty field to the right of the About tab. An

advance tab will appear.

• Open the advanced tab and change the bitrate from the standard

31250 to maximum:

Specify MIDI Ports

(i.e., MIDI ports used for DAW Control)

• While using rtpMIDI, add the following two lines into

D950system.ini

shown below.

(Please note: the entry is case sensitive).

[Midi]

DawPorts=”Vista”

7.3 DAW Settings

rtpMIDI

(to be installed on the DAW system running on Windows platform)

• Install rtpMIDI v1.0.6.219 (requires Bonjour V2.0.2.0 or later) - for

installation details, please refer to the Vista Installation Note “Vista DAW

Comtrol with rtpMIDI”

Note

Mac workstations running on OS X do already provide the rtpMIDI- func-

tionality.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands