Studer Vista 5 M3 Operating Instructions Manual Download

Page: 490 / 564

6.4.6

Shared Functions Page

The Shared Functions page allows adding and editing the shared functions.

Currently the following shared functions are available:

• Generator

• Dynamics sidechain link

• Downmix (surround to stereo)

• Monitor stereo (monitoring DSP)

• Monitor multi-format (monitoring DSP)

• Stereo-to-mono

• Delay 240 ms

• Delay 10 s

Generator

The Generator is used to test the console with sine-wave, white noise, and

pink noise signals. The number is automatically set to 1.

Dynamics Sidechain Link

The dynamics sidechain link allows to link the controls (sidechains) of the

dynamics sections of up to eight different channels. It is similar to the ‘stereo

link’ function found on many standalone compressor/limiters, but the number

of linkable channels has been set to eight rather than only two, so that all cur-

rent surround formats can be supported. The dynamics sidechain link requires

DSP power, so the number is best set to the required minimum. The default

number is zero, and the number can be set freely.

Other Functions

Audio functions have the same functionality as their corresponding channel

functions.

To Edit

To edit the numbers of shared functions go to the VMC Tree View.

6.4.7

Session Configuration Toolbar and Menus

Most of the functions of the Session Configuration Tool are controlled directly

from the four View pages as described in the previous chapters. There are,

nevertheless, some functions that are accessible only via the menus. The

following descriptions briefly explain all the menu items, and only go into

details for functions not explained in the previous chapters.

6.4.7.1

Toolbar

Set sampling rate to 48 kHz.

Set sampling rate to 96 kHz.

Vista 5 M3 Digital Mixing System

6-32 Session Configuration

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands