Studer Vista 5 M3 Operating Instructions Manual Download

Page: 479 / 564

6.4 Detailed Tutorial

The previous chapter gives a brief run through all the basics needed to con-

figure a Studer Vista console. We recommend reading it before you proceed

with the detailed tutorial, found in this chapter.

6.4.1

Set Your own Workspace

The Session Configuration Tool supports multiple windows. Up to now, a

single view Window was used to operate the Configuration Tool functions.

For a better overview of the configuration process, we recommend using

two windows at the same time – the Channel/Bus page alternatively with the

Interface page, and the Core page in addition. This allows following the rough

estimation of the core requirements on-line, as you edit channels, buses and

interfaces.

Channel/Bus

View to

Work on

Minimized

Interface

View

Core View

to Check

Statistics

The last used Workspace setup will be stored when you close the Session

Configuration Tool, and will be recalled the next time you start the program.

Vista 5 M3 Digital Mixing System

Session Configuration 6-21

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands